Page 9 - TURNING CATALOG p635-848

GIQR/L-WT WF PNA RE IC528
Internal Inserts with Whitworth L PDPT
Partial Profile for Threading THREADING
in 8 mm and Larger Holes Left-hand shown

NUT Dimensions
55°

SCREW

Designation L RE PNA PDPT(1) WF DMIN TPIN(2) TPIX(3) •
8.00 16.00 50.00 •
GIQR/L 8-WT-0.05 7.78 0.05 55.0 1.50 4.80 11.00 11.00 50.00

GIQR/L 11-WT-0.05 10.68 0.05 55.0 2.00 6.70

• Can be used for thread milling by circular interpolation • TPI min D/5.9 • D-diameter of thread (pitch max<=W) • For cutting speed recommendations, see page 711
(1) Cutting depth maximum
(3) Threads per inch maximum
(3) Threads per inch maximum
For tools, see pages: MG (414) • MGCH (414)

OAL X

DCONMS HC
Right-hand shown
PICCO-55°-Thread a WF OHN PDX
Inserts for 55° Internal PDX 55°
Threading Profile CF
x
NUT
55° Dimensions

SCREW IC228

Designation DCONMS TPIX(1) TPIN(2) HC CF PDX WF a OHN(3) OAL DMIN
1.90 4.40 15.0 30.00 4.80 •
PICCO R 005.5548-15 5.00 48.00 24.00 0.40 0.06 0.5 2.30 5.30 15.0 30.00 6.00 •

PICCO R 006.5548-15 6.00 48.00 24.00 0.40 0.06 0.5 2.30 5.30 15.0 30.00 6.00 •

PICCO R 006.5524-15 6.00 24.00 16.00 0.81 0.12 0.8 2.80 6.30 15.0 30.00 7.00 •

PICCO R 007.5524-15 7.00 24.00 16.00 0.81 0.12 0.8

• All mini-bars have sharp corners • For detailed cutting data, see page 711

(1) Threads per inch maximum

(2) Threads per inch minimum

(3) Minimum overhang

For holders, see pages: GHPCOR (361) • PICCO ACE (359) • PICCO/MG PCO (holder) (360)

OAL

PICCO-55°-N A DCONMS a 55˚ DMIN
(55° Threading) WF PDX A
Inserts with Internal Coolant
Channel for 55° Internal LU CF HC
Threading Profile
Dimensions
NUT
55°

SCREW IC908

Designation DCONMS TPIX(1) TPIN(2) HC CF PDX WF a LU OAL DMIN •
6.00 •
PICCO R 006.5524-15N 6.05 24.00 16.00 0.81 0.12 0.8 2.30 5.30 14.0 36.00 7.00

PICCO R 007.5524-15N 7.05 24.00 16.00 0.81 0.12 0.8 2.80 6.30 14.0 36.00

• All mini-bars have sharp corners • Solid tools are suitable for PICCO-N / PICCO ACE-N type holders only • For detailed cutting data, see page 711
(1) Threads per inch maximum
(2) Threads per inch minimum
For holders, see pages: PICCO ACE-N (710) • PICCO-N (holder) (710)

643