Page 12 - TURNING CATALOG p635-848

THREADING ±0.04 24

PENTA 24-MT RE 2.4 60° 4.5
Precision Ground Pentagonal 1.8 max
External Threading Inserts
with a 60° Partial Profile Dimensions
for General Industry

NUT
60°

SCREW IC908

Designation TPN(2) TPX(3) RE •
0.250 3.000 0.05 •
PENTA 24A-MT-0.05 (1) 0.250 3.500 0.05 •
PENTA 24-MT-0.05 0.800 3.000 0.15
PENTA 24A-MT-0.15

• TPX=0.175xD
(1) Flat rake (without a chipformer)
(2) Thread pitch minimum (mm)
(3) Thread pitch maximum (mm)
For tools, see pages: PCAD RE/LE-JHP (499) • PCADR/L (316) • PCADR/L-JHP (317) • PCHBR/L (318) • PCHPR/L (316) • PCHR/L-24 (312)
• PCHR/L-24-JHP (313) • PCHR/L-24-JHP-MC (313)

SCIR/L-22-MTR/MTL 7.0 22.0
Threading Inserts with PDX 60°
a 60° Partial Profile RE
Left-hand shown
NUT Dimensions
60° Tough 1 Hard

SCREW IC1008
IC07
Designation RE PDX TPN(1) TPX(2) TPIX(3) TPIN(4) IC1007

SCIL 22-MTL003 0.03 0.4 0.300 0.900 83.00 28.00 • • •
SCIR 22-MTR003 0.03 0.4 0.300 0.900 83.00 28.00 • • •
SCIL 22-MTL007 0.07 0.5 0.700 1.100 36.00 23.00 • • •
SCIL 22-MTR007 0.07 0.5 0.700 1.100 36.00 23.00 •
SCIR 22-MTL007 23.00 •
SCIR 22-MTR007 0.07 0.5 0.700 1.100 36.00
SCIL 22-MTL010 0.07 0.5 0.700 1.100 36.00 23.00 • • •
SCIR 22-MTR010 0.10 0.8 0.900 1.700 28.00 15.00 • • •
0.10 0.8 0.900 1.700 28.00 15.00 • • •

• For detailed cutting data, see page 711
(1) Thread pitch minimum (mm)
(2) Thread pitch maximum (mm)
(3) Threads per inch maximum
(4) Threads per inch minimum
For tools, see pages: NQCH-SCHR/L-BF-JHP (364) • NQCH-Y-SCHR-BF-JHP (364) • SCHR/L-22BF (363) • SCHR/L-22BF-JHP (363) • Y-SCHR-22BF (363)
• Y-SCHR-22BF-JHP (364)

646 ISCAR