Page 16 - HOLE MAKING CATALOG p001-148

INDEXABLE DRILLS DCN C-8D PL OAL LS
Exchangeable Head Drills with DCN-DCXk7 LU DCONMSh6
Coolant Holes and a Cylindrical
Shank, Drilling Depth 8xD

Designation DCN(1) DCX(2) DCONMS LU PL LS OAL SSC(3) MIID(4)
4.0 ICP 040
DCN 040-032-06C-8D 4.00 4.40 6.00 32.62 0.620 35.0 77.70 4.5 ICP 045
5.0 ICP 050
DCN 045-036-06C-8D 4.50 4.90 6.00 36.66 0.660 35.0 82.20 5.5 ICP 055

DCN 050-040-06C-8D 5.00 5.40 6.00 40.73 0.730 35.0 86.30

DCN 055-044-06C-8D 5.50 5.90 6.00 44.81 0.810 35.0 90.70

• Do not mount smaller drilling heads other than the specified range of the drill body • For user guide and cutting conditions, see pages 68-81

(1) Cutting diameter minimum

(2) Cutting diameter maximum

(3) Seat size code

(4) Master insert identification

For inserts, see pages: ICP (18) • ICK (28) • ICM (36) • HCP-IQ (47) • FCP (52)

DCN C-12D PL OAL LS
Exchangeable Head Drills with DCN-DCXk7 LU DCONMSh6
Coolant Holes and a Cylindrical
Shank, Drilling Depth 12xD

Designation DCN(1) DCX(2) DCONMS LU PL LS OAL SSC(3) MIID(4)

DCN 060-072-08C-12D 6.00 6.40 8.00 72.96 0.960 36.0 120.00 6.0 ICP 060 K DCN 6-9.99-Y

DCN 065-078-08C-12D 6.50 6.90 8.00 79.18 1.180 36.0 126.30 6.5 ICP 065 K DCN 6-9.99-Y

DCN 070-084-08C-12D 7.00 7.40 8.00 85.01 1.010 36.0 132.60 7.0 ICP 070 K DCN 6-9.99

DCN 075-090-08C-12D 7.50 7.90 8.00 91.10 1.100 36.0 136.60 7.0 ICP 075 K DCN 6-9.99

• Prior to using the 12xD drill, it is recommended to drill a pre-hole by using a DCN 1.5xD drill or a centering drill • The HCP or QCP drilling head may eliminate the need for a
pre-hole • Do not mount smaller drilling heads other than the specified range of the drill body • For user guide and cutting conditions, see pages 68-81
(1) Cutting diameter minimum
(2) Cutting diameter maximum
(3) Seat size code
(4) Master insert identification
For inserts, see pages: ICP (18) • ICP-2M (24) • ICK (28) • ICK-2M (32) • ICM (36) • ICN (42) • QCP-2M (43) • HCP-IQ (47) • FCP (52)

14 ISCAR