Page 9 - ISCAR FACE GROOVING LINES
P. 9
B A Tool: PCHPRS/LS see page 130 BA Tool: HFHR/L..-M see page 54 FACE GROOVE-TURN
Insert: PENTA 34F-RS/LS… Insert: HFPR/L…
CW = 2.39-4 mm CW = 3-6 mm
CDX = 5 mm CDX = 5.3 mm
DAXN = 22 mm DAXN = 20 mm
Pentagonal insert for face grooving Integral toolholders carrying
and recessing next to shoulders HELIFACE and GRIP inserts. For
up to 5 mm depth of cut at a machining up to 5.3 mm depth of
minimum of 22 mm diameter. cut. 3-6 mm wide inserts can be
mounted in the same pocket.
BC Tool: HFAIR/L…& HGAIR/L
(adapter) see pages 57, 60
Insert: HFPR/L…
CW = 3-6 mm
CDX = 12 mm
DAXN = 32 mm
Exchangeable, internal coolant
adapters carrying HELIFACE and
GRIP inserts. Recommended for
deep internal face machining.
BC Tool: HFIR/L..-MC see page 63
Insert: HFPR/L…
CW = 3-6 mm
CDX = 5 mm
DAXN = 20 mm
Boring bars for shallow face
machining of up to 5 mm
depth carrying HELIFACE and
GRIP inserts. Internal coolant.
3-6 mm width inserts can be
mounted in the same pocket.
Main Applications B C
A
CW CW
CW
CDX DAXN CDX DAXN
CDX External Grooving Internal Grooving
DAXN
Grooving Next to a Shaft
7
