Page 8 - ISCAR FACE GROOVING LINES
P. 8
FACE GROOVE-TURN Medium Diameter Face Machining Systems
BA Tool: HFHR/L… see pages 40-46
Insert: HFPR/L…
CW = 3-6 mm
CDX = 32 mm
DAXN = 25 mm
Integral shank toolholders
carrying HELIFACE and GRIP
inserts. For deep face grooving
and side face turning.
BA Tool: HFPAD… (adapter) see pages 48-50
Insert: HFPR/L…
CW = 3-6 mm
CDX = 20 mm
DAXN = 25 mm
Slanted, screw-clamped adapter carrying
HELIFACE and GRIP inserts. A part
of the MODULAR-GRIP system. Very
rigid, for tough face operations.
Tool: TNFFH see page 109
B Insert: TNF 3-6C…
CW = 3-6 mm
CDX = 35 mm
DAXN = 30 mm
Adapter and blade toolholders
carrying TNF GN/M/P-IQ inserts.
For deep face grooving.
B Tool: HFFR/L… see page 51 BA Tool: TNFFA see page 110
Insert: HFPR/L… Insert: TNF GN/M/P-IQ...
CW = 4-6 mm CW = 3-6 mm
CDX = 38 mm CDX = 35 mm
DAXN = 48 mm DAXN = 30 mm
Economical, double-ended blades Reinforced blades carrying
carrying HELIFACE and GRIP TNF GN/M/P-IQ inserts.
inserts. Recommended for deep Recommended for face grooving
face grooving and face turning to only. Can machine along a shaft.
a maximum depth of 38 mm. Excellent chip evacuation.
6 ISCAR
