MILLING
NPA 28/2020 INCH
New FLASHSOLID Endmill Lines
Highlights
New FLASHSOLID endmills, square, ball nose, relieved neck or without a neck for ISO P, K, M, S material groups.
ISCAR is expanding the FLASHSOLID tool family with two series of endmills (4 and 5 flute).
These new endmills are designed with variable flutes for chatter dampening and are PVD coated with oxidation resistance for prolonged tool life.
The introduction of these products significantly expands the range of solid endmills, offering a large assortment of competitively priced tools in diverse lengths, neck relief and radius options for the entire range of diameters (.125”-1.00”).
The 4 flute endmills are coated with VS910, a multilayer TiAlCN coating for high speed operations, intended for semi-dry or dry machining of cast iron and nickel-based high temperature alloys.
The 5 flute endmills are coated with V910, a TiAlCN coating for machining under dry and wet conditions, excellent for high and low machining rates of alloy steel.
The new series of tools feature an over-center cutting edge.
ECI-4-VF
4 Flute Endmill With and Without Relieved Necks, Assorted Radii and Different Helix For Chatter Dampening
(1) Number of flutes
ECI-4-VF (continued)
4 Flute Endmill With and Without Relieved Necks, Assorted Radii and Different Helix For Chatter Dampening
(1) Number of flutes
ECI-4-VF (continued)
4 Flute Endmill With and Without Relieved Necks, Assorted Radii and Different Helix For Chatter Dampening
(1) Number of flutes
ECI-4-VF (continued)
4 Flute Endmill With and Without Relieved Necks, Assorted Radii and Different Helix For Chatter Dampening
(1) Number of flutes
ECI-4-VF (continued)
4 Flute Endmill With and Without Relieved Necks, Assorted Radii and Different Helix For Chatter Dampening
(1) Number of flutes
ECI-4-VF (continued)
4 Flute Endmill With and Without Relieved Necks, Assorted Radii and Different Helix For Chatter Dampening
(1) Number of flutes
ECI-4-VF (continued)
4 Flute Endmill With and Without Relieved Necks, Assorted Radii and Different Helix For Chatter Dampening
(1) Number of flutes
Slotting
Roughing
Semi-Finish
ECI-5-VF
5 Flute Endmill With and Without Relieved Neck, Assorted Radii and Different Helix For Chatter Dampening
(1) Number of flutes
ECI-5-VF (continued)
5 Flute Endmill With and Without Relieved Neck, Assorted Radii and Different Helix For Chatter Dampening
(1) Number of flutes
ECI-H5-VF (continued)
5 Flute Endmill With and Without Relieved Neck, Assorted Radii and Different Helix For Chatter Dampening
(1) Number of flutes
ECI-5-VF (continued)
5 Flute Endmill With and Without Relieved Neck, Assorted Radii and Different Helix For Chatter Dampening
(1) Number of flutes
ECI-5-VF (continued)
5 Flute Endmill With and Without Relieved Neck, Assorted Radii and Different Helix For Chatter Dampening
(1) Number of flutes
ECI-5-VF (continued)
5 Flute Endmill With and Without Relieved Neck, Assorted Radii and Different Helix For Chatter Dampening
(1) Number of flutes
EBI-4-VF
4 Flute, Ball Nose Endmills With and Without Relieved Necks
(1) Number of flutes
EBI-4-VF (continued)
4 Flute, Ball Nose Endmills With and Without Relieved Necks
(1) Number of flutes
Slotting
Roughing
Semi-Finish
EBI-5-VF
5 Flute, Ball Nose Endmills With and Without Relieved Necks
(1) Number of flutes
Slotting
Semi-Finish
The NPA28-inch-2020's pdf file:
View (PDF) or
Download (ZIP)
