MILLING
NPA 20/2017 INCH
F90SD-12 in the Popular HELIQUAD Line of Indexable Milling Tools is Being Upgraded
Highlights
ISCAR is upgrading and expanding the HELIQUAD line with new milling cutters that carry S/QDM# 1205… single-sided square inserts.
ISCAR is introducing new
F90SD-12
face milling cutters that feature an advanced design with respect to the existing F90SD-12 cutters.
The improved design considerably improves performance when compared to the current tools.
The new face mills are available in a diameter range of 2.000 to 5.000”, in coarse and fine pitch configurations.
Tool Features
-
Greater durability and simpler structure, without the need for extra accessories such as seats,
bushings and their fasteners
-
Coolant channels with exits directed to the cutting edges
-
Upgraded Torx Plus (IP) insert clamping screw for more rigid clamping
-
Increased body hardness combined with HARD TOUCH coating for improved chip flow and
wear resistance
-
5.000”diameter tools are shorter than the previous version, providing higher
stability and easy cutting
The new
HELIQUAD-12
inserts are produced from ISCAR’s latest
SUMO TEC
carbide grades,
significantly increasing productivity.
Current Insert Types
SDMT 1205PDN-RM-M
Inserts with 4 reinforced cutting edges, designed for heavy roughing applications under
unfavorable conditions
SDMT 1205PDR-HQ-M
General-use inserts with 4 helical cutting edges for 90° shoulder milling
SDMR 1205PDR-HQ-M
Super positive square inserts for machining stainless steel, high temperature alloys and several
aluminum grades
QDMT 1205PDN-RM
General-use inserts with 4 neutral cutting edges providing 4 right- or left-hand cutting edges
QDMT 1205...PDTN-M
Positive square general-use inserts with 4 neutral cutting edges providing 4 right- or left-hand
cutting edges
QDCT 1205…PDN -F
Peripherally ground cutting edges for higher precision to be used only on face mills and extended
flute cutters
Tool Applications
-
Machining main engineering materials such as alloyed steel, cast iron, stainless steel and
difficult-to-cut HTSA
-
Wide range of shoulder and face milling operations
-
General engineering applications
Note:
The new
F90SD…12
cutters will gradually replace the current equivalent sizes:
New items
Item
Description
Old items
Item
Description
ISCAR will continue to supply the old cutters until stock is depleted, and then orders will be
switched automatically to their new tool alternatives.
HELIQUAD-12 Inserts Phase Out
Following very low consumption of the HELIQUAD-12 inserts in grades IC950, IC4010, IC4050
and IC50M. ISCAR is phasing out the following inserts:
5603687
|
|
SDMT 1205PDN-RM-M IC950
|
5604215
|
|
SDMT 1205PDR-HQ-M IC4010
|
5603671
|
|
SDMT 1205PDR-HQ-M IC4050
|
5693883
|
|
SDMT 1205PDR-HQ-M IC50M
|
5603673
|
|
SDMT 1205PDR-HQ-M IC950
|
5603742
|
|
QDMT 1205PDTN-M IC950
|
5604488
|
|
QDMT 120532PDTN-M IC950
|
ISCAR will continue to provide the above inserts until stock is depleted.
F90SD-12
90° Face Mills Carrying S/QDM# 12... Inserts
(1) Number of inserts
Note: Parameter designations according to ISO 13399 Standard
SDMT-PDN-RM
General Use Inserts with Four Helical Cutting Edges for 90° Shoulder Milling
SDMT-PDR-HQ
General Use Inserts with Four Helical Cutting Edges for 90° Shoulder Milling
SDMR-HQ
Super Positive Square Insert for Aluminum,
Stainless Steel and High Temperature Alloys
QDMT 1205PDN-RM
QUAD2000 general use insert, has 4 right-hand or 4 left-hand cutting edges.
QDMT 1205..PDTN-M
Inserts with 4 Right- or Left-Hand Cutting Edges for General Use
• Inserts with corner radii larger than .0315” should be used only on the face of the SDK cutter
QDCT-PDN
Precision Ground Inserts with 4 Right- or Left-Hand Cutting Edges for General Use
• Inserts with corner radii larger than .0315” should be used only on the face of the SDK cutter